YB-1450H/1650H High Speed Servo Laminating Machine

YB-1450H/1650H SERVO LAMINATING MACHINE

MAX SPEED 12000SPH

ONE-KEY COMMISSION 20S COMPLETION

CARDBOARD TO CORRUGATED PAPER & CARDBOARD TO CARDBOARD

SERVO COMPENSATION POSITIONING

TOP SHEET LEET AND RIGHT ALL COURSE CORRECTION

Introduction: This machine adopts motion control system and servo correction system, using

multiple sets of photoelectric sensors at the end of the paper the relative position. It is equipped

with 3 servo motors, one controls the bottom sheet and the other two control the top sheet.

And what makes it differ from the normal automatic type is that the convey bridge for the top

sheet is lengthened to be 1.5m, where lies several pulling-balls (correction unit), thus the fitness

is very accurate. Servo laminating machine has the advantages of simple operation, we only need

to input the size of paper and the machine would adjust the feeder, the bottom feeding and the

pressure system automatically, which realizes the intelligent operation.

Detail parts:

1) Top sheet feeding mechanism: equipped with high speed auto dedicated feeder, both

paper lifting and feeding nozzle can freely adjust angle to the paper, to ensure that whether

thick or thin paper can be delivered rapidly and smoothly

2) Bottom paper feeding: Use imported Servo motor electric controlling system, with Japan

NITTA suction belt to make suction power inverter, and belt cleaned by water roller; Patented

technology to ensure corrugate and cardboard goes out smoothly and simple operation

3) Positioning System: Using groups of photoelectric sensing bottom paper forward relative

position, control top paper on both sides of the servo motor, independent compensation action,

the top paper and bottom paper precision laminated

4) Transmission Part : Imported double toothed synchronous belt drive, equipped with a

tensioning device to ensure the accuracy of the transmission, stable, low noise

5) Glue roller: Stainless steel roller, never rust, after narrowly grinding, guaranteed the

minimum amount glue coated evenly. Down roller be cleaned by water roller.

6) Electrical system: Designed in the accordance with European CE requirement, ensure

machine stability, high efficiency and low failure. Using man-machine interface and PLC

combination, display all the information, such as warning, error detect, failures, and

operating speed, etc on the screen at a glance

7) Pre-stack section: pre-stack pile of paper under the condition of non-stop, improve

efficiency. The special design of the pre stack paper frame, save time and effort.

8) Leading Edge Feeding System: This system is for option, more suitable for large size

and thick bottom sheets.

Specification